羟基磷灰石涂层人工关节的应用研究

采用人工合成高纯度的羟基磷灰石粉末，喷涂在具有注册证的钛合金和钴铬钼合金人工关节上。通过生物学基础检测、动物实验和临床试用，证明所制作的各种羟基磷灰石涂层人工关节，能诱发骨质生长，起生物固定作用，对治疗丧失功能的骨胳效果甚佳。     

一种高精度的CMOS带隙基准电压源

设计了一种采用0.25 μm CMOS工艺的高精度带隙基准电压源.该电路结构新颖,性能优异,其温度系数可达3×10-6/℃,电源抑制比可达75 dB.还增加了提高电源抑制比电路、启动电路和省功耗电路,以保证电路工作点正常、性能优良,并使电路的静态功耗较小.     

LED交通信号灯系统的硬件设计

LED交通信号灯是传统交通信号灯的理想换代产品,文中介绍了一种LED交通信号灯系统的硬件设计方案,利用电流环具有光电隔离、抗干扰能力强、通信距离远的优点,结合串行移位、串并转换的数据传输方式,实现了对信号灯的远程弱电控制,并且能够直接实现倒计时显示功能.系统连线简单、安装方便、功能扩充性好,实现了亮度的自动控制.采用这种远程弱电隔离控制方式后,避免了传统的强电控制方式下可控硅容易损坏、系统故障率较高的缺陷,从而可以大大提高系统的可靠性.     

蓝牙智能车载卡的软件实现

介绍一个具有蓝牙通信功能的小型嵌入式系统--蓝牙智能车载卡的软件实现方案.描述了蓝牙智能车载卡在车辆信息化管理系统中的应用,介绍了蓝牙智能车载卡的系统设计方案,重点是软件设计和实现,分析了软件开发中遇到的一些问题及其解决方法,最后给出了实测结果,指出存在的不足之处和改进目标.     

TM1300多媒体DSP的百兆以太网通信接口的设计实现

主要研究TM1300多媒体数字信号处理器(DSP)在pSOS嵌入式操作系统下的100 Mbit/s高速以太网接口的设计与实现.硬件方面,介绍了TM1300系统与RTL8139以太网驱动芯片通过PCI总线互连的实现方式,重点介绍了其中PCI仲裁器的设计和PCI配置空间地址的设置方法;软件方面,介绍了在DSP端内嵌的pSOS操作系统下开发软件驱动RTL8139芯片的方法,重点描述了pSOS的pNA 网络组件的NI接口、RTL8139芯片收发数据的控制方式、驱动程序的发送缓存管理、TM1300访问PCI空间的途径以及内存与数据缓存一致性等要点.最后从速率、可靠性、效率3个方面对实现的以太网通信接口进行了测试,给出了详细的实测结果.测试结果显示,与基于RTL8029芯片开发的以太网接口相比,各项性能均有较大提高.     

Treatment of low turbidity water by sweep coagulation using bentonite

A novel strategy of sweep coagulation to treat low turbidity water is presented herein. Study findings demonstrated that an Na⁺‐saturated bentonite with medium cation exchange capacity (CEC) resulted in significant turbidity removal at a bentonite dosage of 30 mg dm^?3. Bentonite dispersion with fully delaminated platelets tended to undergo a more porous type of coagulation with intense face‐to‐face interactions of platelets and effectively entrapped TiO₂ particles in band‐type structures. This type of coagulation usually results in a large volume of settled flocs with a fluffy structure and excellent turbidity removal efficiency for sweep coagulation. The sign and magnitude of electrical charge on TiO₂ particles has a minor effect on the efficiency of sweep coagulation. Copyright © 2005 Society of Chemical Industry     

MRI fuzzy segmentation of brain tissue using neighborhood attraction with neural-network optimization.

Image segmentation is an indispensable process in the visualization of human tissues, particularly during clinical analysis of magnetic resonance (MR) images. Unfortunately, MR images always contain a significant amount of noise caused by operator performance, equipment, and the environment, which can lead to serious inaccuracies with segmentation. A robust segmentation technique based on an extension to the traditional fuzzy c-means (FCM) clustering algorithm is proposed in this paper. A neighborhood attraction, which is dependent on the relative location and features of neighboring pixels, is shown to improve the segmentation performance dramatically. The degree of attraction is optimized by a neural-network model. Simulated and real brain MR images with different noise levels are segmented to demonstrate the superiority of the proposed technique compared to other FCM-based methods. This segmentation method is a key component of an MR image-based classification system for brain tumors, currently being developed. Index Terms-Improved fuzzy c-means clustering (IFCM), magnetic resonance imaging (MRI), neighborhood attraction, segmentation.     

各向异性损伤理论与复合材料层板损伤的实验研究(一)-各向异性损伤理论

本文讨论了各向异性损伤力学的基本概念并介绍了以应变等效性假设为基础的Lemaitre模型和以能量等效性假设为基础的Cordebois模型.在此基础上作者导出了两种损伤模型的损伤能释放率的表达式.文中作者定义了一维损伤时弹性材料板单元的一些损伤定义,并导出了两种模型在一维损伤时损伤能释放率Y₂的简单表达式,从而为复合材料层板损伤测量的实验研究提供了理论基础,     

LF泡沫精炼渣脱硫动力学的实验研究

对CaO -Al2 O3 -SiO2 系泡沫精炼渣进行了实验室脱硫动力学研究 ,得到的硫传质系数为 1.45 9× 10 -5m s。还就泡沫精炼渣中发泡剂对其脱硫能力的影响进行了研究。     

CPM自滤波非稳腔YAG激光器研究

把由非谐振环和凸面全反射镜构成的自滤波非稳腔应用于撞脉冲锁模Ｎｄ：ＹＡＧ激光器，改善了光束的空间质量和输出稳定性，获得发散角为２倍衍射极限，能量５０ｍＪ，脉宽１０ｐｓ的锁模脉冲，并与未加滤波小孔的ＣＰＭ非稳腔的输出性能进行实验比较。，